Cost, maintenance and convenience
EPA gives broad price ranges, before maintenance: granular activated carbon filters run from about $20 to $1,000 (pitchers at the low end), and RO systems about $150 to $1,000. Costs vary by brand, capacity and installation.
- Pitchers: Lowest upfront cost and no installation, but small batches, slow refills and frequent cartridge changes.
- Carbon filters: Higher upfront cost, but filtered water flows on demand. Cartridges or media still need periodic replacement.
- Reverse osmosis: Needs filter cartridge changes plus periodic membrane replacement, and it sends some water to the drain.
Every type only works if you maintain it. EPA notes that filters are only effective if maintained per the manufacturer’s instructions, and CDC recommends changing them on schedule and wearing gloves while you do it. CDC also points out that whole-home filters that remove chlorine can let more germs grow in your plumbing, so follow service intervals closely.
Water use matters in the desert, too. EPA’s WaterSense program says typical RO systems send at least five gallons to the drain for each gallon treated, while WaterSense labeled RO systems send 2.3 gallons or less.
Reverse osmosis water sent to drain per gallon treated (gallons)
WaterSense labeled RO (maximum)
2.3 gal or less
Typical RO system (at least)
5+ gal
Inefficient RO system (up to)
up to 10 gal
Source: U.S. EPA WaterSense, Point-of-Use Reverse Osmosis Systems (epa.gov/watersense/point-use-reverse-osmosis-systems). Pitcher and carbon filters send no water to drain.